TITANIUM LINE
Two Shaft Mixers and Dispersers – Ground Machines
Models
BIRG: Undervacuum machine version with independent revolving scraper and vertical movement of the mixing shaft during the various process phases by means of a sleeve and sliding cylinders.
AIRG: Machine with independent reversing scraper and vertical movement of the mixing shaft during the various process phases by means of a sleeve and sliding cylinders.
BI: Undervacuum machine version with vertical movement of the mixing shaft during the various process phases by means of a sleeve and sliding cylinders.
AI: Machine in the standard version with vertical movement of the mixing shaft during the various process phases by means of a sleeve and sliding cylinders.
CI: Machine in standard version with vertical mixing shaft movement during the various process phases by protective bellows and sliding guides.
Applications
Inks, Glues, Mastics, Adhesives, Sealants, Plastics, Cosmetic Products, wall fillers, polyester stuccoes, silicones.
Viscosity
From 50,000 cP to around 1,000,000 cP
Installed powers
From 4 kW to 132 kW
Tank capacity
From 25 liters to 2500 liters
*Zanelli reserves the right at any time to make technical, dimensional and aesthetic modifications to the various machine models without notification.
Vertical excursion of the dispersing shaft
The vertical movement of the mixing impeller, called excursion, occurs through the use of pneumatic pistons.
The possibility of adjusting the correct height in relation to the quantity of product contained in the tank guarantees a high flexibility to the machine and also allows to optimize the mixing flows, assurance the fast incorporation of the raw materials and in the case of vacuum machine speeds up the air extraction from the product.
Main transmission
Main electrical motor and speed reducer both fixed to the mixing unit complete with pulley-type transmission and belts with profiles and dimensions suitable for the installed power.
Two Independent Columns structure
On the side of the mixer group there are two mobile columns coated in hard chrome, ground and wear resistant, with technical solution that gives the machine a high strength even in the most critical phases of the production cycle, minimizing vibrations and increasing stability.
TITANIUM LINE OPTIONS
Management of different levels of ATEX regulations.
Undervacuum version.
Automatic vertical movement of the mixing shaft with vacuum pump active during the working process.
Kit for manual or automatic locking of the cover for tanks under overpressure.
Side and bottom tank scrapers.
Tank cooling / heating system thanks to double cavity / serpentine system.
Weighing system on load cells.
Measurement of product temperature.
Low and high pressure washing heads.
Connection between the machine cover and the powder and liquid supply systems.
Software and hardware package for semi automatic or fully automatic machine control.
Remote machine control system.
