NICHEL LINE

Mixers and Dispersers with three shafts – Ground Machines

Models

BIAG: Undervacuum machine version with independent scrapers and two side dispersion / mixing shafts.

AIAG: Machine in standard version with independent scrapers and two side dispersion / mixing shafts.

Applications

Inks, Glues, Mastics, Adhesives, Sealants, Plastics, Cosmetic Products, wall fillers, polyester stuccoes, silicones.

Viscosity

From 50,000 cP to around 1,500,000 cP

Installed powers

From 4 kW to 180 kW

Tank capacity

From 25 liters to 2500 liters

*Zanelli reserves the right at any time to make technical, dimensional and aesthetic modifications to the various machine models without notification.

Dispersing shaft and mixing shaft

Lateral dispersion shaft balanced with adequate taper in the terminal part ensures the elimination of vibrations during the most critical phases of processing even at high speeds. The dispersion tool supplied with the machine is of the toothed disc type with a quick fixing system to the mixing shaft for easy replacement.

Balanced mixing shaft ensures the elimination of vibrations during the most critical processing phases, even at high speeds. The mixing tool supplied with the machine is butterfly type with a quick fixing system to the mixing shaft for easy replacement.

Anchor type shaft with scrapers

Independent central shaft of the anchor type with side and bottom scrapers in order to obtain a perfect cleaning of the inner surface of the tank and at the same time convey the processed product towards the dispersion / mixing impellers reducing production times.

Main transmission

Main electrical motors and speed reducer fixed to the mixer group complete with pulley-type transmission and belts with profiles and dimensions suitable for the installed power.

Two independent columns structure

On the side of the mixers group there are two independent columns coated with hard chrome, ground and wear resistant, with technical solution that gives the machine a high strength even in the most critical phases of the production cycle, minimizing vibrations and increasing stability.

NICHEL LINE OPTIONS

Management of different levels of ATEX regulations.

Undervacuum version.

Kit for manual or automatic locking of the cover for tanks under overpressure.

Remote machine control system.

Different tank locks available.

Tank cooling / heating system thanks to double cavity / serpentine system.

Weighing system on load cells.

Measurement of product temperature.

Low and high pressure washing heads.

Connection between the machine cover and the powder and liquid supply systems.

Software and hardware package for semi automatic or fully automatic machine control.

OTHER MACHINERY

Learn more about the types of industrial machines that make up our production.